General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12563375 views, last view: 11/07/2024 20:47

for questions, announcements etc.

   Board Index   

#9799: Re: Many maps not working under Gutsy Gibbon 7.10

by mneisen on 01/01/2008 13:46, refers to #9794

Well, these are the drivers supplied by Gutsy Gibbon, and with all due respect: I cannot see the point in ruining my system by installing drivers not tailored for my distro.

Nevertheless, SB is a great game and I certainly will continue to play it - even if this means I have to reboot quite a lot ... :-D

Thanks for the information all the same!

Happy New Year!

reply to this message

#9800: How to setup an coop editing lan server in assault cube?

by r3f on 01/01/2008 13:55

Hey guys,
i wanted to play coop editing in Assault cube. But now when im on my lan server and psuh the e button it says that coop editing mode is needed...
i havent found any command to activate coop editing mode. please help me

see ya

r3f

reply to this message

#9801: Re: How does one go about using saved maps?

by rock.n.rol_ on 01/01/2008 17:36, refers to #9797

Type this in your console:

/sp MAPNAME

;)

reply to this message

#9802: Re: How does one go about using saved maps?

by rock.n.rol_ on 01/01/2008 17:37, refers to #9801

Oh i forgot to mention, this is for single player.

for coop, you can use

/coop MAPNAME

ffa:

/ffa mapname

insta:

/insta mapname

It's also in the docs, just have a look ;)

reply to this message

#9803: Re: How does one go about using saved maps?

by steve_e on 01/01/2008 17:57, refers to #9797

Can you not load your maps, or can not load with monsters? If it is the latter, then rock.n.rol_ has provided the solution.

IF that still isn't doing the trick: were you able to load your maps before? Did you install the Assassin Edition since working on your maps?

If you did install Assassin AND you did not make back-ups of your maps then they are worse than fu-bar, they are gone. I lost a number od ambient sounds this way - I backed up everything else, but forgot the downloaded ambient sounds... :( Took me half a day to find them again.

reply to this message

#9804: Is there a way to change the music on Mac OSX?

by Superior on 01/02/2008 00:33

My friend added different music to the game on the Windows version. I couldn't figure out how to change the music on the Mac OSX version. I know that you need to use .ogg files, I just can figure out where to put the files.

reply to this message

#9805: Re: Is there a way to change the music on Mac OSX?

by MovingTarget on 01/02/2008 01:33, refers to #9804

Make a folder in packages/, name it whatever you want, then in sauer do /music "packages/yourfolder/yoursong.ogg". Note that this will loop through the same song endlessly until you change the map.

reply to this message

#9806: a few issues

by Rufe0 on 01/02/2008 13:55

I have just installed the game with the patch on ubuntu. It has a few issues, I cannot move 360 degrees with the mouse. It will go about 180degre hoizontaly, about 45degree verticaly but thats about it... The other thing is connecting to a server, I have got the list from the server, left it several mins etc and it just will not connect to any servers.
Ok thnx for any help cheers
Rufe0

reply to this message

#9807: Re: Many maps not working under Gutsy Gibbon 7.10

by SheeEttin on 01/03/2008 01:00, refers to #9799

Yeah, you're probably using the ati/radeon driver... You want the proprietary fglrx driver.

I wrote a nice little installer, which you can get here: http://kubuntuforums.net/forums/index.php?topic=3082777.0
When that's done, run "sudo dpkg-reconfigure xserver-xorg" and choose the fglrx driver.

Or, there's Envy (http://www.albertomilone.com/nvidia_scripts1.html)... more complicated, but it seems to work for everyone. (I've never used it.)

reply to this message

#9808: Windows error

by dadnoz on 01/03/2008 02:57

I am getting a \"side by side configuration not setup properly\" or some message like that at game startup on Windows Vista 64-bit - any ideas?

Thanks!
mike king

reply to this message

#9809: Re: Windows error

by steve_e on 01/03/2008 03:29, refers to #9808

Do a search on the forum - there is was something posted up not too long ago...

Or click here instead:
http://www.cubeengine.com/forum.php4?action=display_thread&thread_id=1516

reply to this message

#9810: Server

by Chris-German on 01/03/2008 20:37

Hi,
how can i open a server?
i need help, because i doesn't go, like a friend tell it me.


MfG
Chris

reply to this message

#9811: Re: Server

by MovingTarget on 01/03/2008 22:54, refers to #9810

Double click on server.bat, for a start. Look in the docs for more details on command line parameters.

reply to this message

#9812: The nice Visual C++ runtime error.

by Aaron on 01/04/2008 20:34

So yeah i get to playin and all, and within the first five seconds of playing i get the runtime error. Heres what it says in the console:
C:\\Program Files\\Sauerbraten>bin\\sauerbraten.exe -r
init: sdl
init: enet
init: video: mode
init: video: misc
init: gl
Renderer: GeForce4 MX Integrated GPU/AGP/SSE/3DNOW! (NVIDIA Corporation)
Driver: 1.4.0
WARNING: No vertex_buffer_object extension! (geometry heavy maps will be SLOW)
WARNING: No occlusion query support! (large maps may be SLOW)
WARNING: No shader support! Using fixed function fallback. (no fancy visuals for
you)
WARNING: Using NVIDIA texgen bug workaround. (use \"/nvidia_texgen_bug 0\" to disa
ble if unnecessary)
WARNING: No framebuffer object support. (reflective water may be slow)
WARNING: Non-power-of-two textures not supported!
init: console
init: gl: effects
init: world
init: sound
init: cfg
init: localconnect
init: mainloop
read map packages\\base\\metl4.ogz (0.2 seconds)
Mining Station by metlslime
game mode is ffa/default

And then occasionally, i get en endless win32 exception error.

reply to this message

#9813: ..

by Flame on 01/04/2008 20:55

hi,
I am from germany.

I don\'t know how to install new maps...
I copyed the CGZ-file into the folder \"...packages/maps\" but nothing happened...
I don\'t know what to do, I used google, but I coudn\'d found any help.

So can you help me please???

reply to this message

#9814: ..

by Flame on 01/04/2008 21:08

ok I found it...

reply to this message

#9815: ..

by Flame on 01/04/2008 21:08

ok I found it...

reply to this message

#9816: Cannot Connect to master server

by draeded7 on 01/04/2008 23:04

Unblocked the Assault cube on my PC, have fast connection, what am i doing wrong?

reply to this message

#9817: Re: Cannot Connect to master server

by Drakas on 01/04/2008 23:12, refers to #9816

draeded7: http://assault.cubers.net/forum/
nJoy!

reply to this message

#9818: Re: The nice Visual C++ runtime error.

by Aaron on 01/05/2008 16:53, refers to #9812

Never mind. By updating my drivers, i seem to have fixed the problem.

reply to this message

   Board Index