General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12554705 views, last view: 11/05/2024 22:02

for questions, announcements etc.

   Board Index   

#11331: Re: CUBE2 TEXTURES - Pan/Scale/rotate a feature?

by tentus_ on 10/06/2008 01:54, refers to #11330

The texturing stuff was implemented a long time ago, but the slowdown was so great that they were removed in favor of doing it via shaders.

I'm not sure what you mean about rotating models. The yaw is the first parameter of any mapmodel. http://sauerbraten.org/docs/editref.html#_mapmodel_

Finally, in regards to the keyframe animation: I'm a bit unclear as to what you mean on this one too, but from what I understand, you want to be able to position geometry into tweened keyframes? This has three rock-solid reasons it would be disadvatageous to implement, along with some lesser reasons I won't get into.
1) Lighting. Trying to light geometry that is not in a fixed location means that you *have* to use dynlights for each mobil sections of geometry, which is tremendously resource-intensive. Trying to prerender all possible lightmaps puts you into an infinite spiral pretty quickly.
2) Imagine the interface for how this would work. You'd have to use a set of commands for navigating between frames, because trying to use a palette of some kind (like in flash or 3Dmax) would go completely against the rest of the interface.
3) Animated geometry would not fit on the octree, which means that aside from the nasty rendering hacks that would be needed, the 100% accurate hit detection of the Sauer engine would be lost.

I'm probably just misunderstand what you're asking, feel free to correct me.

reply to this message

#11332: Very Slow gameplay

by sgman on 10/08/2008 02:58

For some reason this game won't run for more than 1-2fps.

My hardware:
AMD 1.8ghz
Radeon 9600
1 gig ram

I know this is old stuff, but this game isn't exactly top of the line. Even after putting all the in game settings on the lowest possible it doesn't help the fps at all.

I know I have the latest drivers for all my stuff.

reply to this message

#11333: ubuntu 8.04 / Sauerbraten/ sound/ help!

by doctor-death on 10/08/2008 11:08

ok i have sound for music dvd youtube wine games other linux games but no sound with Sauerbraten

i am using esound as i had trouble with pulse

Any idea's please ??

reply to this message

#11334: Re: ubuntu 8.04 / Sauerbraten/ sound/ help!

by Quin on 10/08/2008 13:30, refers to #11333

Try: esddsp ./sauerbraten
Or turn off esound before starting the game.

reply to this message

#11335: Message censored by administrator

by asdf on 10/09/2008 12:14

#11336: master of server

by reyalp on 10/10/2008 00:37

whenever i go into a server and try to claim master by saying /setmaster 1 it says that i need to use the word /auth

what is the word or way to become master when it says this?

reply to this message

#11337: Re: master of server

by Hirato Kirata on 10/10/2008 02:26, refers to #11336

you first need to have an authorisation key, and use /authkey to load your private key. the authkey should be placed in your autoexec if you have one.

in game you can just use /auth to grab master. I would sugest you make sure you have appropriate updates installed

reply to this message

#11338: Re: master of server

by Quin on 10/10/2008 03:34, refers to #11337

*kicks Hirato*

Note that auth keys are given out on a person-to-person basis, you can't just add one and get master.

reply to this message

#11339: Re: master of server

by JadeMatrix on 10/11/2008 01:30, refers to #11337

When was that implemented? Was there a patch?

reply to this message

#11340: Compiling

by eTronicGaming on 10/11/2008 06:52

I'm interested in modding and coding Sauerbraten, but I was wondering how the compiling works. Is there a site with a tutorial or something to get started with this? I know how to compile c++ files and write to them, but I didn't understand how I would go about doing this for this game with all its files and it being outputted as a bat file, not exe.

reply to this message

#11341: Re: @11357:Compileing

by eTronicGaming on 10/11/2008 07:52, refers to #11341

Forums are for helping. So please, if you have no contributions, don't reply. Save your time.

reply to this message

#11343: Re: Compiling

by MovingTarget on 10/11/2008 15:08, refers to #11342

And it compiles to (Sauer directory)\bin\sauerbraten.exe unless you change it so it won't replace the vanilla executable.

reply to this message

#11344: Requesting Permission to use Artwork

by nat1192 on 10/14/2008 16:53

I believe that the artwork for the Cube 1 game is copyrighted to the original creators and I would like to ask for permission to use it in a port of the original cube engine to the OMAP3 (pandora), called Pandora's Cube. The engine is more or less ready (just a few modifications to the Makefile and file structure), I am just waiting for the Pandora team to release the official toolchain to make 100% sure it works.

Does anyone know who I should contact (ie email addresses)?

reply to this message

#11345: can we ban 213.171.218.64?

by NIm on 10/15/2008 02:03

ubuntu, ctf, nvidia pcx5300

So I think this might be an ubuntu question, but sauer keeps getting unfullscreeened, and slowing down. Since sauer hijacks the mouse, I can't get back. I have to go into terminal, find sauer and kill it. Sucks. anyway, what can i do to fix this?

reply to this message

#11346: silly noob question

by Guru_Sev on 10/17/2008 02:54

i would like to play sauerbraten with just me and my friend, no one else. the only way that i could seem to do that is by making a server. i forwarded the ports correctly,and clicked on server.bat, and did not get the error message; on the contrary, it informed me that i had just created a dedicated server. im glad i managed to forward the ports correctly, but i dont want a dedicated server, i want a server that i can play on. i dont know what to do at this step, could someone point me in the right direction? much appreciated.

reply to this message

#11347: Rigid Body Physics

by Skofo on 10/17/2008 03:59

Would it be possible to implement it into this?

reply to this message

#11348: Re: silly noob question

by noerrorsfound123123 on 10/17/2008 04:26, refers to #11346

What's the problem? Leave the server window open, open Sauerbraten, and /connect localhost.

reply to this message

#11349: Re: silly noob question

by Guru_Sev on 10/17/2008 05:17, refers to #11348

ahah, there we go, nerrorsfound, that worked perfectly. i tried to look this stuff up in one of the readmes but i didnt see it. how could my friend join, and how could we password-protect the server?

reply to this message

#11350: Re: silly noob question

by noerrorsfound123123 on 10/17/2008 07:05, refers to #11349

Your friend joins using your external IP address. Your post shows 24.254.230.152, so he should use the "connect" command and put the IP address after it.

http://sauerbraten.org/docs/config.html
Right click server.bat and click "Edit" to add commandline options.

Default batch file contents (at least on the work-in-progress version since I don't have the CTF edition right now):
"bin\sauerbraten.exe -d -c6 %1 %2 %3 %4 %5"

To keep it off the master server so other people won't see it and join, use -mlocalhost.

"bin\sauerbraten.exe -d -c6 -mlocalhost %1 %2 %3 %4 %5"

There's no password protection on servers other than logging in as admin, but you can log in as master with "setmaster 1" and set the server as private (mastermode 3) to ensure people can't join even with the IP address.

Check that page for other useful options.

reply to this message

#11351: Re: silly noob question

by Guru_Sev on 10/17/2008 21:41, refers to #11350

I really want to thank you, you have been incredibly informative and helpful, and I really appreciate it.

What is the significance of the numbers and percents? I read in the configuration document that /m needs a url, so how are these symbols used instead?

reply to this message

   Board Index