General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12550241 views, last view: 11/05/2024 13:27

for questions, announcements etc.

   Board Index   

#11270: I can\'t get the game to run fast enough

by J The Twiztid on 09/07/2008 06:34

Hi yall. I have a problem. I can\'t seem to get the game running fast enough to work with. I thin k the problem might be my gaphics cards, but I am not entirely sure. I have an 8800gt in my computer. Is there some way to get the game running faster. When I started it up, it was running at 1 fps. If anyone could help me figure out how to work this out, that would be great. thx

reply to this message

#11271: Re: Drivers

by J The Twiztid on 09/07/2008 07:45, refers to #11271

Yeah. I tried Updating the driver, if that\'s what you mean, for the linux OS, but for some reason when I try to install it, it gives me an error.

gedit has not been able to detect the character coding.
Please check that you are not trying to open a binary file.
Select a character coding from the menu and try again.

This popped up when I tried to run the driver update for linux. Also, when I try to boot it in the terminal, it gives me this error: Error: Nvidia installer must be run as root. I am going to be truthful, I have no clue what that means.

Error opening log file \'/var/log/nvidia-installer.log\' for writing (Permission denied); disabling logging.

Sorry if I sound like a really big noob or something. I am really new to this stuff and linux.

reply to this message

#11272: Re: ..

by J The Twiztid on 09/07/2008 07:52, refers to #11272

The drivers work for windows , but Linux is another story. I am trying to figure out some of this. It's completely foreign to me right now. They have the driver, but the driver file doesn't like me very much.

reply to this message

#11273: Re: Drivers

by noerrorsfound_has_done_it_again on 09/07/2008 07:54, refers to #11271

If you're on Ubuntu the simplest way is to use the Restricted Drivers Manager to install them for you: http://www.michaellarabel.com/index.php?k=blog&i=114

That's only a guess since you didn't provide that important info. Otherwise it's more complicated:
Get to a terminal with Ctrl Alt F2 (Ctrl-Alt-F7 would bring you back to your GUI)

Log in and type:
sudo /etc/init.d/gdm stop

Then:
chmod +x ./WhateverTheNameOfTheNvidiaDriverIs.run

To finally install:
sudo sh ./WhateverTheNameOfTheNvidiaDriverIs.run

After it's complete you can start Xserver again with:
sudo /etc/init.d/gdm start

reply to this message

#11274: Re: Drivers

by noerrorsfound_has_done_it_again on 09/07/2008 07:57, refers to #11273

You might have to adjust the path, though. The above would run it from whatever directory you start in after logging in which should be your home directory. The run file might be on your desktop so it would be:
~/Desktop/WhateverTheNameOfTheNvidiaDriverIs.run

Or:
/home/your-username/Desktop/WhateverTheNameOfTheNvidiaDriverIs.run

reply to this message

#11275: Re: Drivers

by J The Twiztid on 09/07/2008 08:06, refers to #11273

Yes, actually, I am running Ubuntu. Sorry about not mentioning that. I looked through the info you sent, but I could not find the restricted Drivers option. Do you need to get that from the synaptic package management? That, and it is also for 7.04. Is there any difference between 7.04 and th latest one?

reply to this message

#11276: Re: ..

by noerrorsfound_has_done_it_again on 09/07/2008 09:27, refers to #11275

Actually installing drivers on Ubuntu is easier than Windows. On Windows you have to go online for the installer and on Ubuntu you get a prompt after installation and' you've just got to check a box.

Yeah, there is apparently a difference in the menus.

http://www.google.com/search?q=restricted+drivers+8.04&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

First result will tell you the location.

reply to this message

#11277: Re: my new comp dont run sauer!

by Kaomet on 09/07/2008 16:48, refers to #11269

I already tried to remove sauer then re install ctf edition, before and after I changed my GPU driver.
I also tried to run my computer on a single core, the problem persist.

By the way, legacy is the term nvidia use for all their products before the geforce 4 series.

reply to this message

#11278: Re: my new comp dont run sauer!

by Kaomet on 09/07/2008 17:00, refers to #11277

Fixed!
(I forgot the C++ runtime, shame on me...)

reply to this message

#11280: Re: Serverlist

by a~baby~rabbit on 09/09/2008 07:54, refers to #11158

With regards to not all servers showing in the serverlist...

In my case it seems the issue was that my d-link router does something wacky to wifi connections, like throttling UDP connection rates (i.e. a rather enthusiastic interpretation of UDP being lossy). Plugging directly into the router via ethernet eliminated the problem.

Unfortunately I don't have any non-Mac wifi gear to 100% eliminate the chance that the issue is related to Mac.

reply to this message

#11281: Re: Serverlist

by Quin on 09/10/2008 06:32, refers to #11280

This is actually quite common, especially in BitTorrent communities. Alot of the time it has to do with overloading the NAT tables, as those routers have few resources (alot like the D-Link run Linux/BusyBox). You'd probably also find that Windows XP SP2 and later systems do the same thing when they hit 128 concurrent connection attempts - there just aren't that many active servers.

reply to this message

#11282: Cube Engine Development Blog

by Quin on 09/11/2008 16:00

Hi guys, just thought I'd let you all know about something new I'm trying out; a blog dedicated to Cube Engine Development. I hope to use it as a catalyst for sharing *everything* that *everybody* is doing within the community, so I hope you give it a look and consider helping out.

http://cubedev.blogspot.com/

reply to this message

#11283: Is a world like this possible using cube?

by solifugus on 09/16/2008 00:46

My specialty is coding AI. My brother\'s specialty is making 3D models. He discovered this engine and now I am reading about it and trying out map making with it (I\'m kinda tired of Torque).

1. Do I need to edit the core source code to build AI for cube or is there a special interface/mod framework?

2. Can I keep up a persistent world, editing on the fly? For example, can I add code to birth and grow trees, grass, etc.

My object is to experiment with an intelligence engine that learns and develops culturally in an artificial ecosystem.

reply to this message

#11284: Re: Is a world like this possible using cube?

by a~baby~rabbit on 09/16/2008 01:06, refers to #11283

1 - you'd have to edit the code to add AI... maybe track down Quin who did AI for his Blood Frontier Alpha mod <http://sourceforge.net/project/showfiles.php?group_id=198419>

2 - to a certain degree you can do this... the usual obstacle is that lightmaps need to be recomputed if you change the world, so it depends on how much incorrect lighting you can live with and if you have opportunities to pause and recalc the lightning

If you're keen then sensible questions usually get sensible answers on the #sauerbraten irc channel on quakenet.

reply to this message

#11285: How to make my md2 float?

by Softcoder on 09/16/2008 08:25

I am trying to use an md2 model in sauerbraten, but the model always shows as if from the waist down the model is sunk into the ground. Is there some way to fix that? I tried using a LOT of editors (including Blender and various md2 editors) but do not know what needs to change to fix this "half sunken" issue.

Thanks

reply to this message

#11286: Re: How to make my md2 float?

by Quin on 09/16/2008 13:31, refers to #11285

http://sauerbraten.org/docs/models.html#mdltrans

reply to this message

#11287: /sendcfg?

by Deehy on 09/16/2008 17:22

I't would be possibble to add command that will send map configuration file to server?

reply to this message

#11288: Searching an German Sauerbraten DEV

by LinuxDonald on 09/17/2008 03:49

Hello i´m searching an german sauerbraten developer. For an project. And i can pay for the job. When you are intrested replay here or my icq is: 252773163 my mail is linuxdonald@linuxdonald.de

reply to this message

#11289: Compile error when creating console command for stepspeed

by isuckinthis (NOOB) on 09/21/2008 12:29

Hi, i need help, how can i fix this? i get this error:
error: cannot convert `STEPSPEED' from type `float' to type `void (*)()'|

when compiling this code:

float STEPSPEED=1.0f;
void stepspeed(int *cl_stepspeed)
{
STEPSPEED=(float)*cl_stepspeed;
}
COMMAND(STEPSPEED,"i");

I don't know why, because exactly the same way, but with gravity or jumpvel it does work.

reply to this message

#11290: Re: Compile error when creating console command for stepspee

by isuckinthis (NOOB) on 09/21/2008 12:33, refers to #11289

Nevermind!, i fixed it. (capital letters was the problem)

reply to this message

   Board Index