General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12527142 views, last view: 11/02/2024 04:24

for questions, announcements etc.

   Board Index   

#11112: Re: Advanced cube construction (Sauerbraten)

by tentus_ on 08/10/2008 05:40, refers to #11108

For a cone, make an 8 sided cylinder (8 is usually enough) and work your way up and in towards the point. You can usually get away with really only making 1/4 of the shap, and then copy-rotating the other quarters.

reply to this message

#11113: Re: Advanced cube construction (Sauerbraten)

by scax on 08/11/2008 00:16, refers to #11108

I will try that out. If we meet up on sauer sometime can you help me out?

reply to this message

#11114: Re: Advanced cube construction (Sauerbraten)

by tentus_ on 08/11/2008 04:19, refers to #11113

I honestly don't have the free time to edit online, sorry. I only get a few minutes to play around at a time, while my psds are uploading (or downloading on a bad day). One of the downsides of being head of graphics at a small company, your time is never truly your own.

reply to this message

#11115: Problems with servers.

by R0b0t1 on 08/11/2008 22:00

After trying to create a dedicated server from the command line (I've forwarded the ports) it says it can't reply to the masterserver and then idles. However, I made a server in-game once (I don't know how -- I started making a map and set mode to 1) and I seemed to be responding the the masterserver fine. However, I had problems claiming master/admin on it, through setmaster, approve, and any I haven't seen.

1) How can I make my server work,

2) and how can I claim master :-\

reply to this message

#11116: Re: Problems with servers.

by Quin on 08/12/2008 03:38, refers to #11115

Then its most likely that you haven't really forwarded the ports properly. For help with your router/modem, please refer to its manual or ask for support from the manufacturer.

http://cube.wikispaces.com/Multiplayer+Guide
http://sauerbraten.org/docs/game.html#multiplayer_online
http://sauerbraten.org/docs/config.html#_minus_ps

reply to this message

#11117: ..

by R0b0t1 on 08/12/2008 05:14

No, I have forwarded them. I am absolutely sure of this. If I had not forwarded them, I would not have been able to have others join my listen server :-\

And even if that is not the case... I know what I typed in there. I wish people wouldn't always point to the manual. Some people who ask questions have already read it.

reply to this message

#11118: Re: ..

by Quin on 08/12/2008 05:24, refers to #11117

I wish people would limit their questions to specific Sauerbraten/Cube questions, rather than asking us why their port forwarding doesn't work. Not only do we not know the setup of your home networking, but we don't have the answers for every home networking situation.

Maybe you didn't save your setup and it reset back to normal? There are millions of these maybe questions and no real idea as to what is really going on from our point of view.

For all intents and purposes the problem is on your end, not Sauerbraten's. All we can do is point you to what we have already compiled on the issue, because that's what it's there for - a repository of Cube knowledge.

reply to this message

#11119: ..

by R0b0t1 on 08/12/2008 06:27

No, it has been saved. I consider this a Sauerbraten specific question because I am sure I set up everything correctly.

reply to this message

#11120: Re: Setting up a server.

by demosthenes on 08/12/2008 10:09, refers to #11053

Quin, this will probably shed some light on why they're doing it: http://slash7.com/pages

reply to this message

#11121: Re: Setting up a server.

by tentus_ on 08/12/2008 14:37, refers to #11120

It's actually really depressing how accurate that article was. :(

reply to this message

#11122: ..

by Osbios on 08/12/2008 15:43

@R0b0t1:
Can you give some more infos?
What system you are using? (most likely windows I guess)

Is there any firewall installed?

Did you forward TCP instead of UDP Ports?

And PLEASE follow the links Quin posted!!!

In the documentation is even a link to a page where you can test your port setting.

reply to this message

#11123: Re: Setting up a server.

by SheeEttin on 08/12/2008 15:43, refers to #11121

Yeah, I gave someone else a link to it a week or two back... I'm kinda considering adding it to my bookmarks to paste into posts, and give it to people along with with links to the docs (or whatever).

reply to this message

#11124: Re: ..

by R0b0t1 on 08/12/2008 19:21, refers to #11122

No, I read the articles before I first tried to set up a server. I forwarded UDP ports. (The proper ones, that are like 28k or something)


I'm using Ubuntu 8.04, and I don't know if it has a firewall, I didn't manually install one.

reply to this message

#11125: ..

by smartalco on 08/12/2008 23:17

^there is no set requirements, and nothing really has changed to cause that, make sure you have shaders and other high-power settings turned off

I have one other comment: did it used to be that you couldn't see enemies armor until you hit them? I didn't remember it being like that and I actually think it is kinda a dumb change (running the latest CTF version with the patch thing on OS X 10.5)

reply to this message

#11126: copying wip files from previous version

by aftas cookie is gone on 08/13/2008 01:27

hey, i just updated from cvs and copied my wip map folders and base files from the older version. the cvs version loads the map but without the textures. the geometry is all coloured, but no texture on it.
what is the catch i forgot about?
thanks in advance

reply to this message

#11127: Moving Forward

by lonewolf18 on 08/13/2008 03:43

Hey there. Well I've been playing around with Sauerbraten for awhile now and I gotta say it's a pretty cool engine. So far I can see that it's a great way to design maps. The engine is stable and speedy. Also the music is very addictive. My main question is would it be possible to use this engine to build an actual first person shooter game? Thanks. =)

reply to this message

#11128: Re: Moving Forward

by tentus_ on 08/13/2008 05:32, refers to #11127

Uhm, yes? I get the feeling that I'm missing something, how is Sauerbraten not "an actual first person shooter game"?

reply to this message

#11129: Re: Moving Forward

by demosthenes on 08/13/2008 08:25, refers to #11128

You're missing the fact that "actual" is apparently now equivalent to "commercial". I think.

reply to this message

#11130: Wierd problems with binds.

by R0b0t1 on 08/13/2008 12:01

I was playing around with cubescript inside a multiplayer game (not cheating, mind you, just to talk to someone) and the wierdest thing happened. The next map all of my keys were unbound. I don't remember running a command like unbindall, if such exists, but they all spontaniously went out the window.

I've gotten them back, but whats even stranger, is that it does not recognize the commands "togglezoom" and "universaldelta" (when scrolling the mouse, pressing "g", respectively). Is there any reason such a strage thing should happen?

reply to this message

#11131: Re: Wierd problems with binds.

by Quin on 08/13/2008 13:15, refers to #11130

Q: Why is the game behaving strangely?
http://cube.wikispaces.com/FAQ#toc4

reply to this message

   Board Index