General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12524155 views, last view: 11/01/2024 23:26

for questions, announcements etc.

   Board Index   

#11045: Re: RPG Specific object placement

by tman_elite on 08/02/2008 23:29, refers to #11044

I'm pretty sure the command is
/newrpgspawn Name
where Name is whatever the thing is that you are making (wolf, npcman, etc.)

reply to this message

#11046: Setting up a server.

by R0b0t1 on 08/03/2008 03:30

(I know this is probably in here, but I really don't want to look. If you've posted the solution before, and would link me to it, thank you.)

I'm on Ubuntu Linux and have a Linksys modem. I've gone to the 'setup modem' page and told it to forward the correct ports, but when running the shell script with the argument '-d' it says it cannot respond to the master server's ping. I really don't know what would be wrong.


Also, how would I add a title to it? And, of course, claim master on it? I haven't found much help in the documentation...

reply to this message

#11047: Re: Setting up a server.

by Hirato Kirata on 08/03/2008 04:04, refers to #11046

I'm not sure what's wrong with the modem, but did you set it to send the data to your PC?
I don't think ubuntu has a built in firewall, but check the possibility of a firewall too

for the latter half of it
http://sauerbraten.org/docs/config.html#command_line_options

try looking a bit harder next time ;)

reply to this message

#11048: sorry for spamming again (door opening)

by Cooperlsxl on 08/03/2008 04:22

I was looking through and I do not understand what info to put into the command.

reply to this message

#11049: Re: Setting up a server.

by SheeEttin on 08/03/2008 05:52, refers to #11046

I use Kubuntu, and I don't think I've ever gotten a server running (not that I've ever really tried).

I think starting with Hardy (maybe Gutsy), there is a firewall (or at least some iptables/ipchains) thing installed by default, though I don't know if it's enabled, or even how you configure it.

To test your server, try these commands (in Sauer) in sequence:
/connect 127.0.0.1
/connect 192.168.1.100 // (or whatever your LAN IP is)
/connect 24.3.87.215 // (or whatever your WAN IP is)
If one fails, it'll tell you where the problem is. 127.0.0.1 should work, because it shouldn't leave your host (computer). 192.168.1.100 will pass through your router and back to you. Connecting to your WAN IP will connect out through your router and the world of the Internet, then back to you.

Aside from that, I can't really help.

reply to this message

#11050: Weapons, Door

by Cooperlsxl on 08/03/2008 05:54

Help again, I did not see my quesiton answered because I do not really understand this helping community but here it is again.

I am needing help on spawning weapons and making doors move, I need a exact way to do it becasue the Readme doesnt really explain it all that goood. Much appreciated for everyone who trys to help.

reply to this message

#11051: Re: Weapons, Door

by SheeEttin on 08/03/2008 06:14, refers to #11050

Here's how you make some ammo:
I'm assuming you've just started Sauer.
- Press "E".
- Press "`". A little prompt with a slash should appear above where the HUD should be.
- Type "newmap".
- Look at the ground.
- Press "`".
- Type "newent rockets". Press enter.
- Press "`".
- Type "savemap ammomap".
- Press "`".
- Type "map ammomap".
You should see some rocket launcher ammo appear where you placed the rockets entity.

reply to this message

#11052: Re: Weapons, Door

by tman_elite on 08/03/2008 06:16, refers to #11050

Two and a half minutes of reading the links that were posted would take less time than waiting for an answer.

To make weapons, press t and type:
/newent ammotype
The ammo types are:
shells -- shotgun
bullets -- chaingun
rockets -- rocket launcher
grenades -- grenade launcher
riflerounds -- rifle
cartridges -- pistol

Moving doors are more complicated. You will want to read the editing reference for this. To make a simple door that opens when you step near it and closes after 5 seconds, type:
/newent mapmodel N 10
where N is the id number of a door model. I don't happen to know these off the top of my head. Look at other door models to find it.

reply to this message

#11053: Re: Setting up a server.

by Quin on 08/03/2008 20:01, refers to #11046

"I know this is probably in here, but I really don't want to look."

The increase of people saying this sort of stuff is just downright disrespectful. We should not be tolerating this kind of lazy behaviour and poor ettiquette, lest it get worse.

reply to this message

#11054: New HellPig replacement character..

by deathguppie on 08/03/2008 20:25

Hey, I was playing single player the other day and was thinking about how outdated the Hellpig character was and so I decided to redo it in a more modern style just for fun.

Screen shot is here...
http://proviction.com/deathguppie/images/Hellpig2-screen1.jpg

So anyway in order to export my character and have it's animations work properly as a Hellpig replacement, does anyone know what the naming conventions are for the actions so that the game can use the character?

Also I didn't notice any character bump maps, but I know md5 supports it. Are character bump maps supported, and or are there any character shaders built in or otherwise that would handle diffuse/normal_map/specular_map??

Just wondering..

Deathguppie

reply to this message

#11055: Re: New HellPig replacement character..

by tentus_ on 08/03/2008 21:38, refers to #11054

I can't answer your questions with much confidence (geartrooper?), but I can say that as a fellow artist, that's pretty ballin'. It'd probably be a bit more acceptable if there was an orange-ish skin closer to the original, but I personally like what you've got up a lot.

Any stats on that model (polycount, etc)?

reply to this message

#11056: Re: New HellPig replacement character..

by $k!llz on 08/03/2008 21:45, refers to #11054

ya the hellpig is kool it reminds me of something off avp.no eyes its the bomb.

it would be bettre with a bumpmap

reply to this message

#11057: aard

by $k!llz on 08/03/2008 21:47

ok so i was reading the readme and the contributers part. and i read that eihrul is the lead programmer.so i was wondering does aard still participate in development?

reply to this message

#11058: HellPig2 stats

by deathguppie on 08/04/2008 00:19

Hey, thanks it was actually a fairly quick model. The Hellpig was easy because it is a fairly basic concept in the first place.

tentus: I thought about the orange thing but it I think characters are moving toward more realistic style skins.. plus I wanted to be able to use red for highlights. The poly count is 888 tris.

$killz: I sculpted a high poly, and mapped it to the low, so it really depends on how the shader deals with the normal map as to how good it looks. If Sauerbraten can use a spec map that would be better. I do have one. If it still looks like I need to mess with it when I export it to the game, I'll chop off any bad corners, and re-export it.

As soon as it look's acceptable I'll put it up for download. Probably within a day or two at the latest.

reply to this message

#11059: ps.

by deathguppie on 08/04/2008 02:10

Thanks for taking the time to answer me eihrul@work. I suppose I could have found that info but it is nice to know that it is current. As it turns out I didn't have the correct md5 exporter anyway.

If anyone wants to check it out for themselves I put up the idle-animation in a .blend file here..

http://proviction.com/deathguppie/blender/hellpig2-idle.blend

You will need one of the apricot branch test builds of blender to see it properly. You can get them from http://www.graphicall.org

reply to this message

#11060: Re: Setting up a server.

by R0b0t1 on 08/04/2008 02:33, refers to #11053

You, my friend, are also on the lackadaisical side of things by not being willing to help other people. Even if I am not willing to help my self, the posters that help me are helping other people by moving this information to the front. This giant 'question thread' seems to be a bane to this community, as all relevant information is quickly sucked back inside.

reply to this message

#11061: Re: Setting up a server.

by Quin on 08/04/2008 04:03, refers to #11060

Note how every answer was a link to documentation of some sort. You just don't understand you waste people's time by being lazy.

reply to this message

#11062: ..

by JadeMatrix on 08/04/2008 07:16

I'm looking to replace my graphics card. I currently have:

ATI Radeon 9600:
Chipset Model: ATY,RV351
Bus: AGP
Slot: AGP
VRAM (Total): 128 MB
Vendor: ATI (0x1002)

I'm thinking about an Nvida card, somewhere <$120, even if it's second-hand. Any suggestions as to a model?

reply to this message

#11063: finding the floor

by scanf on 08/04/2008 07:24

I'm having issues with my mod basically finding the floor.

I'm using the raycubepos function to try and find the floor under me. the distance does not look correct. Here's my code. 'x.o' is the position of my entity. Is there something else I should be doing?

vec down(0, 0, -1);
vec hit;
float dist = raycubepos(x.o, down, hit, 0, RAY_CLIPMAT|RAY_SKIPFIRST);

x.o = hit; // should be the floor ?

reply to this message

#11064: Unknown command: editmode

by Raw Toast on 08/04/2008 15:24

I've been editing on Suerbraten successfully for awhile now, but all of a sudden I just got on and whenever I press "e", I get the message "Unknown command: editmode". It KNOWS what I mean, but it won't do it! Why is editmode no longer recognizable?

reply to this message

   Board Index