General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12532327 views, last view: 11/02/2024 15:37

for questions, announcements etc.

   Board Index   

#10468: Re: google ads?

by MovingTarget on 05/03/2008 01:24, refers to #10467

I don't see them either. I have the same setup as you (except noscript).

reply to this message

#10469: Re: ADS

by SheeEttin on 05/03/2008 05:35, refers to #10469

Huh? How will placing ads generate traffic?

reply to this message

#10469: shader effects on textures...

by Ikyuao on 05/03/2008 10:52

...how i do add a shader effects to apply on flat textures in editor mode? thanks

reply to this message

#10470: sluggish Sauerbraten

by crich70 on 05/03/2008 21:19

Hi I'm new to Sauerbraten and game engine related topics in general and I'm having a confusing problem. If I move around in the map that comes up when the game starts I have no apparent problem, nor do I appear to have a problem in the edit mode, but if I enter one of the SP games I end up having my character be sluggish in his movements. Is there an easy way to sort out what the problem is? I'm running it on a computer with winXP and with a AMD Sepron Processor 3200+ (1790 mhz) and 768 mb ram.

reply to this message

#10471: Re: sluggish Sauerbraten

by MeatROme on 05/03/2008 21:48, refers to #10470

http://cube.wikispaces.com/Multiplayer+Guide
or just look at your local "docs/" folder :)
Which SP-mode are you using - the slow-motion ones vary the gamespeed depending on your health.

reply to this message

#10472: Re: google ads?

by yoopers on 05/03/2008 22:54, refers to #10466

I don't find the ads distracting or in poor taste at all. And I don't use adblockers; my cognitive dissonance serves me just fine. ;]

reply to this message

#10472: ..

by crich70 on 05/03/2008 23:01

Actually it's when I try to access the games under the SP maps in general so far that I have the problem.
How do you find the default configuration file "defaults.cfg"? The docs say it's located in the "config" directory but is it in one of the folders or is it the file that's a "Microsoft office" file contained just within the main folder? I'm not even sure where to start looking for the file nor how to create the config.cfg file. Is it just a matter of creating a text file with that name? I'm a novice when it comes to doing such editing.

reply to this message

#10473: ..

by crich70 on 05/04/2008 00:07

Not sure if it connected properly (had to try a few options to find how to connect since I have DSL rather than Lan and no local server) but things still seemed to be slow to respond in multiplayer as well.

reply to this message

#10473: Re: ..

by crich70 on 05/04/2008 00:25, refers to #10472

Actually its more a matter of the character not moving at the same speed as when I move my mouse say. I move the mouse (to get the character to turn around) and it's a minute later that the character's view actually changes. The character takes a minute to try to fire his weapon after I push the button on the mouse as well. My computer has the Radeon Xpress 200 chipset (as near I can tell from system info.) and an ATI Radeon X300 GPU.

Specs:
* Four extreme parallel 3D rendering pixel pipelines
* Two programmable vertex shader pipelines
* PCI Express x16 lane native support
* 64-bit or 128-bit memory interface supporting 64MB, 128MB, or 256MB DDR1 memory configurations
* Full DirectX® 9 support

reply to this message

#10475: Re: ..

by SheeEttin on 05/04/2008 01:41, refers to #10473

Do you have the most recent drivers?
You can find the appropriate drivers through here: http://ati.amd.com/support/driver.html

The Xpress family is actually integrated with the motherboard. Those are known to be rather low-powered when it comes to 3D rendering (and I think the Xpress 200 is a rather old one anyway).
If you want to, you can pick up a discrete graphics card pretty cheaply. (I recommend http://newegg.com/ .)

reply to this message

#10476: ..

by crich70 on 05/04/2008 01:48

Thanks for all the tips everyone. I've finally got at least some of the single player games to work (haven't tried them all yet) after turning off the shaders & Vsync and making sure my driver was up to date. It's fun to blast the ogre's. lol.

reply to this message

#10477: ..

by {Qs}{Homicidal} on 05/04/2008 03:37

Have fun and rock on [{-_-)]

reply to this message

#10478: ..

by tentus_ on 05/04/2008 04:30

Dear Geartrooper:

Mr. Fixit is badass, and looks great in action.

Gratefully,
-Tentus

reply to this message

#10479: Daz 3d models

by crich70 on 05/05/2008 19:12

Would they work in saurbraten? Some of them (the base characters) are free and they have props there as well. http://www.daz3d.com/

reply to this message

#10480: ..

by {Qs}{Homicidal} on 05/05/2008 22:14

2 things
1 they cost money
2. licensing ISSUES Ahoy

they look nice but i don't think its gonna happen

reply to this message

#10481: on Fixit

by Oh No Ghost! on 05/06/2008 01:51

The new player model looks and moves fantastically, good job Gear! Personally I think the arms stick off too far on the sides, but that's far from a major issue.

reply to this message

#10482: ..

by {Qs}{Homicidal} on 05/06/2008 02:37

yea I noticed that two but i really don't care I like the Wild West Spurs and 6 guns stance :D Pwning model

reply to this message

#10483: Mapping scale and ramp forming???

by crich70 on 05/08/2008 10:47

Are there any basic tips on how to best plan out a map in terms of scale and such? I'm planning to use graph paper to make sure my plan is logical but I'm not sure how best to scale things. (2X2 squares for each square on the game or more.) Also how do you get ramps to form? Is it just altering a cube with the proper keys or something else?

reply to this message

#10484: Re: Mapping scale and ramp forming???

by MeatROme on 05/08/2008 13:04, refers to #10483

Have you seen the wiki page
http://cube.wikispaces.com/Mapping+and+Editing
- especially the 'Editing related links'!?!
Regarding your (personal) scaling-preference I think nobody can really tell you what to use; I'd say it already depends quite a lot on what you're going to map anyway.
Maybe try a rough sketch (no graph-paper required) first, for the outlines and major walls/obstructions.
Then build that into some rough-blocky geometry ... save it and run around a little to be sure you've got the dimensions about right ... like test how long it takes you to walk from one end to the other.
Only then - I suggest - would it be appropriate for you to start using graph-paper. Maybe on your 3rd or 4th map you can start with the graph-paper approach right from the start - after you've gotten a bit of a better feel for sizes/scales of the engine.

re:ramps - there's no automatic geometry-creation commands available as such .. build (with Q+MW) the smallest possible segment of your ramp and then copy-n-paste it to it's full size.

HTH

reply to this message

#10485: Requirements

by tentus_ on 05/09/2008 05:53

So the other day Nashaii and I were talking about making a simple map together (a fulfillment of the lava salmon map, for those interested), and a question came up that stuck with me.

Is there a set of "official requirements" for maps to get into the releases?

At first I though "no, of course not, it's just whatever the devs like the most", but the more I thought about that answer, the less comfortable I was with it. Taking a good look at the maps in the distribution, it seems kind of hodge-podge... lots of old maps that have fallen behind the times and not updated in years, side by side with maps that are brand-spanking new and only work in CVS. The quality of the maps in both categories is widely varied, from fairly cool to amazing to just acceptable.

So, what are consistent factors that people have noticed? What are our devs most interested in seeing in new maps? And for the mappers in the distributions, do you guys have any plans for keeping your maps up with the new features and such?

reply to this message

   Board Index