General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12533066 views, last view: 11/02/2024 17:25

for questions, announcements etc.

   Board Index   

#10462: Re: TEXT PROBLEM

by %username% on 05/01/2008 19:53, refers to #10374

While typing command, start with the slash "/".
To re-bind [T] button, enter command:
/bind t [ saycommand ]
It should help

reply to this message

#10463: Re: can i use this?

by a'baby'rabbit on 05/02/2008 01:49, refers to #10461

If you've got a good GPU then there are alternative funky ways of doing good outlines...
Since cel shading would probably require writing new shaders anyway, then you just output normal information and then use post processing (i.e. a fullscreenshader) that generates the outlines based discontinuities on attached 'normal' and 'depth' buffers. The bulk of the effort is rewriting the shaders rather than the extra code imho

reply to this message

#10464: outline

by Hirato Kirata on 05/02/2008 10:31

If he doesn't mind, he can always modify the code to allow /outline to work in any gamemode, and default to 1, but it's gonig to be a bit too fake as outline is meant to help mappers with fine details in tiny indistinguishable geometry

~Hirato Kirata

reply to this message

#10465: google ads?

by a~baby~rabbit on 05/02/2008 15:52

- on the rhs of the forum pages. I suppose you've got to pay for hosting anyway you can - yuck...

reply to this message

#10466: Re: google ads?

by Aardappel_ on 05/02/2008 20:17, refers to #10465

this is just an experiment... cubeengine.com gets a LOT of traffic, just having a look what that amounts to. It is not said that it is permanent.

reply to this message

#10467: Re: google ads?

by Hirato Kirata on 05/03/2008 00:50, refers to #10466

Keep in mind, several visitors won't be seeing them at all...

I for a fact know I and Nieb won't ;)
and there's bound to be others with similar browser set ups to ours.

/me hugs firefox, noscript and adblock

~Hirato Kirata

reply to this message

#10468: Re: google ads?

by MovingTarget on 05/03/2008 01:24, refers to #10467

I don't see them either. I have the same setup as you (except noscript).

reply to this message

#10469: Re: ADS

by SheeEttin on 05/03/2008 05:35, refers to #10469

Huh? How will placing ads generate traffic?

reply to this message

#10469: shader effects on textures...

by Ikyuao on 05/03/2008 10:52

...how i do add a shader effects to apply on flat textures in editor mode? thanks

reply to this message

#10470: sluggish Sauerbraten

by crich70 on 05/03/2008 21:19

Hi I'm new to Sauerbraten and game engine related topics in general and I'm having a confusing problem. If I move around in the map that comes up when the game starts I have no apparent problem, nor do I appear to have a problem in the edit mode, but if I enter one of the SP games I end up having my character be sluggish in his movements. Is there an easy way to sort out what the problem is? I'm running it on a computer with winXP and with a AMD Sepron Processor 3200+ (1790 mhz) and 768 mb ram.

reply to this message

#10471: Re: sluggish Sauerbraten

by MeatROme on 05/03/2008 21:48, refers to #10470

http://cube.wikispaces.com/Multiplayer+Guide
or just look at your local "docs/" folder :)
Which SP-mode are you using - the slow-motion ones vary the gamespeed depending on your health.

reply to this message

#10472: Re: google ads?

by yoopers on 05/03/2008 22:54, refers to #10466

I don't find the ads distracting or in poor taste at all. And I don't use adblockers; my cognitive dissonance serves me just fine. ;]

reply to this message

#10472: ..

by crich70 on 05/03/2008 23:01

Actually it's when I try to access the games under the SP maps in general so far that I have the problem.
How do you find the default configuration file "defaults.cfg"? The docs say it's located in the "config" directory but is it in one of the folders or is it the file that's a "Microsoft office" file contained just within the main folder? I'm not even sure where to start looking for the file nor how to create the config.cfg file. Is it just a matter of creating a text file with that name? I'm a novice when it comes to doing such editing.

reply to this message

#10473: ..

by crich70 on 05/04/2008 00:07

Not sure if it connected properly (had to try a few options to find how to connect since I have DSL rather than Lan and no local server) but things still seemed to be slow to respond in multiplayer as well.

reply to this message

#10473: Re: ..

by crich70 on 05/04/2008 00:25, refers to #10472

Actually its more a matter of the character not moving at the same speed as when I move my mouse say. I move the mouse (to get the character to turn around) and it's a minute later that the character's view actually changes. The character takes a minute to try to fire his weapon after I push the button on the mouse as well. My computer has the Radeon Xpress 200 chipset (as near I can tell from system info.) and an ATI Radeon X300 GPU.

Specs:
* Four extreme parallel 3D rendering pixel pipelines
* Two programmable vertex shader pipelines
* PCI Express x16 lane native support
* 64-bit or 128-bit memory interface supporting 64MB, 128MB, or 256MB DDR1 memory configurations
* Full DirectX® 9 support

reply to this message

#10475: Re: ..

by SheeEttin on 05/04/2008 01:41, refers to #10473

Do you have the most recent drivers?
You can find the appropriate drivers through here: http://ati.amd.com/support/driver.html

The Xpress family is actually integrated with the motherboard. Those are known to be rather low-powered when it comes to 3D rendering (and I think the Xpress 200 is a rather old one anyway).
If you want to, you can pick up a discrete graphics card pretty cheaply. (I recommend http://newegg.com/ .)

reply to this message

#10476: ..

by crich70 on 05/04/2008 01:48

Thanks for all the tips everyone. I've finally got at least some of the single player games to work (haven't tried them all yet) after turning off the shaders & Vsync and making sure my driver was up to date. It's fun to blast the ogre's. lol.

reply to this message

#10477: ..

by {Qs}{Homicidal} on 05/04/2008 03:37

Have fun and rock on [{-_-)]

reply to this message

#10478: ..

by tentus_ on 05/04/2008 04:30

Dear Geartrooper:

Mr. Fixit is badass, and looks great in action.

Gratefully,
-Tentus

reply to this message

#10479: Daz 3d models

by crich70 on 05/05/2008 19:12

Would they work in saurbraten? Some of them (the base characters) are free and they have props there as well. http://www.daz3d.com/

reply to this message

   Board Index