General Thread

by Aardappel on 01/05/2002 01:55, 15527 messages, last message: 03/01/2024 13:02, 12556207 views, last view: 11/06/2024 08:26

for questions, announcements etc.

   Board Index   

#10139: ..

by makkE on 02/25/2008 01:04

Make sure you have opengl-drivers installed for your chipset.

reply to this message

#10140: ..

by ATIRULE on 02/25/2008 01:32

MMM 8210 chip is low end update your drivers I am not sure how well cube 1x runs on the older Intel chips I would Expect fps in the range of 20-35 at 800x600 with that chip
I had a intel I810 once not a very good GPU for any kind of gameing :(

If you have a little $$ and really wanna play

you can pick up a 5XXX pci card for under 30 online I have also seen a 6200 that was PCI
at my local geek shop but a 5XXX would be your best bet due to the low endness of your system

reply to this message

#10141: particles

by ewilde01 on 02/25/2008 04:58

does anyone have a list of the possible particle codes and what each code does?

reply to this message

#10142: Re: particles

by tentus_ on 02/25/2008 05:00, refers to #10141

http://sauerbraten.org/docs/editref.html#_particles_

reply to this message

#10143: Re: particles

by yetanotherdemosthenescomputer on 02/25/2008 05:45, refers to #10141

The list above is incomplete. For an aid to creating particles, you might try this: http://www.quadropolis.us/node/1005

reply to this message

#10144: ..

by -- on 02/25/2008 16:48

Sauerbraten grabs X-server hotkey combinations or what? I cannot switch between windows/desktops using default ALT+TAB/CTRL+FN combinations. How to fix it???

reply to this message

#10145: Re: ..

by -- on 02/25/2008 17:44, refers to #10145

Thx a lot!!

reply to this message

#10146: Re: Glibc?

by Drakker__ on 02/25/2008 17:52, refers to #10130

I doubt there will be another release of Cube 1.

Check the packages list for your distro and check if you can find glibc5. You can have both glibc 5 and 6 installed at the same time. You might have to add other sources for older packages, though I have never used Arch, so I wouldn't know which ones.

Another option is to compile Cube 1 yourself, Last time I tried, it compiled just fine with glibc6.

reply to this message

#10147: Re: Fonts are blurry

by Drakker__ on 02/25/2008 17:56, refers to #10134

What's your video card? Do you have similar problems in other games?

reply to this message

#10148: Assault Cube: turn off Antialiasing & Anisotropic Filtering?

by Mac987 on 02/25/2008 22:43

I updated my drivers & Assault Cube usually runs fine. Sometimes it does get a little laggy, so I read the ReadMe and it said to turn off Antialiasing and Anisotropic Filtering. How do I do this in Windows XP Professional Edition?
Thanks.

reply to this message

#10149: Re: Assault Cube: turn off Antialiasing & Anisotropic Filter

by Hirato Kirata on 02/25/2008 23:31, refers to #10148

they should be off or at minimal levels in the first place. in sauer one would use /fsaa and /aniso to set them, while for assaault cube I would imagine they are the same.

In some cases people use driver based overrides to override AA and anisotropic filtering settings. so check that it's set to application default or 1.

~Hirato Kirata

reply to this message

#10150: I hate to ask this, but...

by tentus_ on 02/26/2008 01:49

Is there any way that the community can mass-request that someone get Jean Pierre'd, given that said someone is a detraction to the patience of the veterans and seriously misguiding/misinforming newcomers to the community?

reply to this message

#10151: Re: I hate to ask this, but...

by yetanotherdemosthenescomputer on 02/26/2008 04:05, refers to #10150

I know to whom you are referring, and I agree. But what is this "Jean Pierre"-ing you are referring to?

reply to this message

#10152: Re: I hate to ask this, but...

by tentus_ on 02/26/2008 04:36, refers to #10151

Jean Pierre was our infamous little troll a little while ago, who has returned a few times under the alias "Lavaball" and "Lex Luthor" if I remember correctly. He was a serious problem and eventually had to be removed: if I remember correcty, Aard's method was to create the illusion of the forums being down, specifically for Jean Pierre. Aard's post mentioning this is still my favorite forum post ever.

Does that make me mean/bitter? I don't want to come off that way, I'm just completely out of patience, and don't want to end up in a stupid argument.

reply to this message

#10153: Re: I hate to ask this, but...

by yetanotherdemosthenescomputer on 02/26/2008 04:57, refers to #10152

No, that sounds like quite the excellent solution. I'm tired of the person in question's misinformation and demonstrations of stupidity as well.

reply to this message

#10154: Re: I hate to ask this, but...

by ezombie on 02/26/2008 07:43, refers to #10153

Oh pooo...

Now you guys let the cat out of the bag, and he will know what happened *if* it does in fact happen.

(or something like that)

reply to this message

#10155: Quadropolis

by -- on 02/26/2008 20:45

What happened with quadropolis? I cannou upload map!

reply to this message

#10156: Message censored by administrator

by SatanChild on 02/27/2008 16:36

#10157: Re: Quadropolis

by MeatROme on 02/27/2008 20:42, refers to #10155

Yes, the problem has come to our attention ... especially when two files (e.g. map-file and screenshot) are in the pipeline.

Temporarily the node-creation form now allows for these files to be uploaded in seperate editing-of-the-node sessions ...

reply to this message

#10158: LOL

by Langford on 02/27/2008 21:55

I just accidentally typed /newmap 113 instead of 13 into the console, and actually waited for it ... I recommend not doing that.

reply to this message

   Board Index