Sauerbraten - Bug reports |
by Gilt
on 11/28/2004 19:49, 574 messages, last message: 06/30/2007 22:00, 520588 views, last view: 09/29/2024 20:22 |
|
So yeah, since I don't feel like doing a whole lot of testing anymore, I may as well leverage my resources, and shove that responsibility to all of you. Hopefully, this will allow for more updates, and a less buggy engine.
The Format:
-----------
What: A *short* description of the bug / problem.
How: point form of relevant steps to reproduce the bug.
When: revision of exe. OS, video card... yeah I don't know, anything that might be relevant. keep it short.
Detail: any other stuff that might be relevant. like pics. http://www.imageshack.us/ if needed.
-----------
new releases here:
http://cvs.sourceforge.net/viewcvs.py/sauerbraten/sauerbraten/sauerbraten/bin/sauerbraten.exe?view=log
for each new version, I will list fixed bugs. you are then responsible to make sure that it really is fixed, and then confirming it in this thread.
!!! NOTE !!!: this thread is not for feature requests, design discussion, bitching, moaning, yadda yadda, etc. there are other threads for that. plus, a forum thread already does not afford great organization. please no garbage.
Keep reports short. I have a habit of skimming large blocks of text.
Focus on the WHAT, not the WHY. There is a tendancy in people to want to be too helpful. They try to diagnose the problem instead of very clearly describing what is wrong. at the very least, keep theories in the detail section.
some examples are below:
|
|
Board Index
|
|
#372: .. |
by makkE
on 04/07/2006 14:58
|
|
This might be due to a corrupt md2 file.
What app do you use to create/export md2´s?
The Blender export script for example is known to cause problems some time.
To be on the safe side, re-open your md2 with q2modeller
ftp://ftp.gamers.org/pub/mirrors/ftp.planetquake.com/rmd/q2modeller/q2mdlr9b.zip
and export it again from there. You´ll need to assign a dummy pcx file on export, but it won´t change anything about the skin.
Ms3d has also known to never cause a problem with exporting md2.
That´s all info I can offer on it.
reply to this message
|
|
#373: Problem |
by pushplay
on 04/12/2006 04:53
|
|
I was going to finish off the clip in the map I made so it could get some play. So I did a fresh CVS checkout and the bin didn't run, it said "This program cannot be run in DOS mode." I replaced the bin with the exe from the last packaged release and got the following:
C:\Game Files\Sauerbraten>bin\sauerbraten.exe -w1600 -h1200
init: sdl
init: enet
init: video: sdl
init: video: mode
init: video: misc
init: console
init: gl
Using GL_ARB_vertex_buffer_object extensions
rendering using the OpenGL 1.5 assembly shader path
Corrupt JPEG data: 4 extraneous bytes before marker 0xd9
JPEG datastream contains no image
The latter probably isn't worth persuing unless it happens after the former is dealt with.
reply to this message
|
|
#374: Re: Problem |
by drian@firm05
on 04/12/2006 09:49, refers to #373
|
|
Maybe because some jpg file is not tagged as binary in the cvs.
reply to this message
|
|
#375: pushplay: |
by metlslime
on 04/12/2006 10:25
|
|
i've been having that problem for weeks -- ever since eihrul reorganized the folder structure.
It seems to be a problem with CVS configuration, but it doesn't seem to be something that can be fixed in the client that is retrieving files, so I suspect it is something that needs to be fixed on the clients that are submitting files.
reply to this message
|
|
#376: Re: Problem |
by pushplay
on 04/13/2006 04:02, refers to #374
|
|
That would make sense. It's easy enough to fix that once we track down the borked jpg.
TortoiseCVS has enough sense to add jpgs as binary by default.
reply to this message
|
|
#377: Done |
by pushplay
on 04/13/2006 04:23
|
|
The problem was flare.jpg. I deleted it from cvs, grabbed the most recent clean version from cvs and readded it in binary mode. It should be good now.
reply to this message
|
|
#378: ?bug or not? |
by Death (ChaosCL)
on 04/13/2006 14:42
|
|
I don't know if this is a bug with my system or sauer itself.
When I start sauer in the new shader edition it starts up at 30 FPS then goes down in about 5 seconds to 5-8 FPS i think it is because of the shader, I have tried it in the physics edtion and I get like 50-80 FPS.
Why is this happening any one got any idea need to know If I can fix this if it is a problem with open GL or something else or what.
reply to this message
|
|
#379: Re: ?bug or not? |
by CC_machine4
on 04/14/2006 12:30, refers to #378
|
|
the shaders are a big impact on performance (especially some older cards). Try disabling them by adding commandline -f to your sauerbraten.bat (the file that you double click to start sauer)
reply to this message
|
|
#380: Re: ?bug or not? |
by Death(ChaosLLeader)
on 04/21/2006 00:46, refers to #379
|
|
how you do that i could figure it out but I don't wanna wait a month
reply to this message
|
|
#381: .. |
by makkE
on 04/21/2006 00:52
|
|
He told you, death.
add -f to the end of the first line in sauerbtaten.bat.
reply to this message
|
|
#382: Re: ?bug or not? |
by Death(ChaosLLeader)
on 04/21/2006 00:55, refers to #380
|
|
did that it says unknown command line. i went to the text thing and typed /-f
what now did I do something wrong
reply to this message
|
|
#383: .. |
by makkE
on 04/21/2006 01:04
|
|
Modify your sauerbraten.bat file. Don´t type it in the game. like this:
bin\sauerbraten.exe -w800 -h600 %1 %2 %3 %4 %5 -f
reply to this message
|
|
#384: Re: .. |
by Death(ChaosLLeader)
on 04/21/2006 01:09, refers to #383
|
|
ok thanks it toke me a sec I didn't know you had to right clikc and go edit man o well ty.
reply to this message
|
|
#385: Max Health Boost Glich |
by spy
on 04/21/2006 23:10
|
|
I found out that if you can get up to 100000 hp. Here are the steps of how it happened.
1. I got up to 1000 hp.
2. I then was damaged and below 1000 hp.
3. I then ran over a health boost
4. I then died.
5. When i respawned I had 1010 hp.
I then tested it on a map i made with just health, healthboost, and rockets and i was able to get my health up to 20680.
I don't think this is suppose to happen. But i like it anyway :)
reply to this message
|
|
#386: .. |
by spy
on 04/21/2006 23:26
|
|
After I had 20680 hp i got bored so i am guessing that you can get up to 100000
reply to this message
|
|
#387: Re: Max Health Boost Glich |
by Passa
on 04/22/2006 04:36, refers to #385
|
|
you have too much spare time on your hands ;-)
intresting bug there.. but not that critical im guessing, who can get to 1000HP in a multiplayer game anyway ;-)
reply to this message
|
|
#388: problem with entitys in coop |
by CC_machine4
on 04/23/2006 17:42
|
|
WHAT: while coopediting, someone else created a teledest that appeared to have the wrong number, so the corresponding teleport didnt work. (no destination for tag 2)
so i deleted the teledest that had the wrong number and replaced it with a different one. it worked fine for me, but the other person claimeed the teleport didnt work and the teledest had the wrong number.
in a different occurence, i created a tree mapmodel (mapmodel 2) and it showed up on my buddy's screen as a turret mapmodel. he claimed the mapmodel # was 22, even though i created mapmodel 2.
HOW: get 2 people in coopedit and create a mapmodel, and the mapmodel will show up with a different # than yours.
WHEN: winXP, happened with 1 person on linux and one person on winXP so i dont think this is relevant
DETAIL: i think the number properties are being messed up somehow on /newent in coopedit..
reply to this message
|
|
#389: Re: problem with entitys in coop |
by eihrul
on 04/23/2006 19:56, refers to #388
|
|
Yep, I know what's causing this bug. It'll be fixed in the next release.
reply to this message
|
|
#390: Re: Bug: texture browser misaligned in widescreen mode |
by clyde
on 04/25/2006 14:41, refers to #370
|
|
I found the misalignment persisted regardless of what aspect ration I ran (fullscreen or windowed).
reply to this message
|
|
#391: radeon card bug |
by Passa
on 04/25/2006 16:16
|
|
i tried running sauerbraten on another pc today with the following specs
sempron 2600+
512mb ram
xpertvision 128mb radeon 9250
it would not get higher than 0.5fps (shaders would not work anyway for some reason) at any resolution with any drivers. i tried the xpertvision ones, the ones from the ati site and the latest omega ones. none made a difference.
does anyone else have a 9250 out there who can test this out on their card?
reply to this message
|
|
|
Board Index
|
|